Oil Spill Buoy

Oil Spill Buoy

Oil spill buoy ‌ is an important equipment used for monitoring and detecting oil spill at sea, mainly used for timely discovery and treatment of oil spill accidents to protect the Marine environment, it is a kind of monitoring equipment installed in the sea to detect oil film on the water surface and send alarm signal when oil spill is detected. As it is equipped with oil spill detector, it is suitable for all kinds of common oil spill pollutants, such as diesel oil, gasoline, crude oil and so on.
Send Inquiry
Description

Main map

 
 
 

img00252
img10896

Oil spill buoy ‌ is an important equipment used for monitoring and detecting oil spill at sea, mainly used for timely discovery and treatment of oil spill accidents to protect the Marine environment, it is a kind of monitoring equipment installed in the sea to detect oil film on the water surface and send alarm signal when oil spill is detected. As it is equipped with oil spill detector, it is suitable for all kinds of common oil spill pollutants, such as diesel oil, gasoline, crude oil and so on.

The power supply system mainly relies on: solar panel + spare lithium battery to ensure long-term battery life. In addition, they are usually equipped with a GPS positioning system, which helps to respond and deal with oil spills quickly by transmitting data in real time without satellites (such as Beidou, Iridium) or radio (4G/5G) ‌,

Its monitoring principle mainly adopts ultraviolet fluorescence active detection and oil film method passive detection technology, which has high sensitivity and accuracy ‌. Oil spill buoys are widely used in ports, wharfs, offshore oil drilling and production platforms and other oil pollution monitoring scenarios

At present, oil spill buoys are also facing technical challenges: inaccurate oil film identification accuracy: complex sea conditions (such as waves, light changes) may interfere with optical sensors.

The monitoring sensor is polluted: oil contamination may reduce the sensitivity of the chemical sensor. Extreme environmental impact: high salt, high humidity, low temperature environment puts high requirements on equipment reliability. Our response to large model recognition of AI images: improve the accuracy of oil film recognition through machine learning (such as distinguishing oil film from seaweed).

Self-cleaning coating: The material selection of the buoy uses biomimetic materials to reduce oil adhesion

Deployment of multi-buoy synergies: buoy group network monitoring, covering a wider range

 

Product Specifications

 

 

Diameter (mm)

900

1800

2300

2600

Focal plane (mm)

1200

2000

2500

3000

Reserve buoyancy (kg)

180

1401

2490

3000

 

Application Scenarios

 

 

1. Ocean current research

2. Navigational Warnings

3. Ecological disaster warning

 

img20565
img10896
img00252

 

Packaging and Transportation

 

 

product-724-367

Reasonable design of packaging, according to the size and characteristics of the product, design a reasonable wooden box structure to ensure that the product is fully supported and protected inside the wooden box. The export wooden box needs to meet the requirements of environmental protection and avoid the use of materials harmful to the environment. The environment-friendly materials and techniques should be selected to ensure that the wooden cases will not cause pollution to the environment ‌ during production and transportation

img05452

 

Hot Tags: oil spill buoy, China oil spill buoy manufacturers, suppliers, factory, Oil tracking buoy, Oil Spill Buoy, Warning navigation mark, intercoastal buoy navigation, navigation warning buoy, Mooring and buoys